Jump to content

Two Idiots Printing Service - TIPS


Lord marcus
 Share

Recommended Posts

Hello all,

 

Lord-Marcus here. I'm one of the two idiots at Two Idiots Printing Service.

We are a 3D printing service with both resin and FDM capacity, and are licensed printers for a number of ranges.

Examples of our offerings include Peculiar companions, caballeros miniatures, and coming in December we have a full line of desert-themed undead from txarli factory (and terrain from lovecraft designs.) Finally there will also be Roman themed elves from Caballeros miniatures in December.

We would appreciate if you take a gander at our webstore (see below link.) If you have questions or need TIPS, feel free to message me or reply to this thread. I intend on keeping this thread updated with any new releases.

non-miniatures note: We also have gift packs available and suitable for non-wargamers, including lithopanes with lightbox. We also have ear savers for use with facemasks.

We can do custom works, please message me or email us at the listed email  on our contact us page,

Even if you decide not to make a purchase, we appreciate your time and consideration.

https://two-idiots-printing-service.myshopify.com/

Examples of rendered miniatures and print quality:

1900715531_mountedcommander2.JPG.2e57565283745d114c65b00d77d4fe75.JPG1161783568_arquebusiers1.jpg.4bfd3708e224a9f0ca73db8dd0fc7191.jpg765099207_darkelfheavyinfantry.jpg.6a7acf5f150f1b4ba2257b6776290308.jpg483426504_paintedheavyinfantry.jpg.d6b2f2a9b90129a5a14301ec4b30b28b.jpg

scale shot with Wargames Atlantic Persian Archers (used for scale reference only.)

1025369464_scaleshotheavyinfantry.jpg.1832a9788ad40595b2047a797237dff4.jpg

Edited by Lord marcus
  • LOVE IT! 1
Link to comment
Share on other sites

Two Idiots Printing Service is proud to announce the release of more licensed prints!

 This time it is the dread elf legions from Caballero Miniatures.

This unique take on dark elves gives them a roman theme and armor to match, although there are variants available with more traditional garb.

Shields packs have also been made available, as there have been 11 shield variants made available with these miniatures.

There will be more coming from this range, and we are excited to see it grow.

Get yours here: https://two-idiots-printing-service.myshopify.com/collections/caballero-miniatures

1087594_sm-.png

1087600_sm-.png

1087596_sm-.png

1087598_sm-.png

1087597_sm-.JPG

1087595_sm-.png

1087599_sm-.JPG

Link to comment
Share on other sites

We're back at it again folks.

This time, theres even more shield options for the Caballero dread elf legions (including scutum and kite shields.) In addition there is the legion command group of a unit commander, musician, and banner bearer

Furthermore, if you like terrain, we have started to add the terrain from desert adventures to our store (as we pledged for a license when the STLS went to kickstarter.)

https://two-idiots-printing-service.myshopify.com/collections/caballero-miniatures

https://two-idiots-printing-service.myshopify.com/collections/desert-adventures-terrain

https://two-idiots-printing-service.myshopify.com/collections/desert-adventures-minis

 

1908607097_desertadventurer1.JPG.6189a85676c156310b494bffbba2c5fb.JPG755097953_desertslayer2.JPG.dbc35378b24aa1bdcf7ce71493cef99b.JPG1864452353_Flyingcarpet2.JPG.11dee35bf4270813bbd716c035e54c24.JPG1297069077_priestess2.JPG.77dd8557fc6efdf0a82b83d6e7230974.JPG1076766014_abusimbel2.JPG.9bf1acb7c3318e532e30f231e289f165.JPG252548500_AnubisAltar2.jpg.4e36d4c476f4870ba55aff2dc558c916.jpg312817604_deserthouses2.jpg.4e6fe1469375df0f2e245e0cda9f5265.jpg24544359_ruinset2.JPG.e2b25d85bce2bc02b576686b059952f6.JPG1028648312_Sphinx2.JPG.df2e8f2b736a654b6bf90b40b4442453.JPG677797347_watchtower1.JPG.666353e25fcb697318f316c90a36809c.JPG

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
Link to comment
Share on other sites

Holiday/end of year sale!

Hello gamers! This is Lord Marcus, your friendly representative from Two Idiots Printing Service.

As you are no doubt aware, we have added quite a variety of products to our available catalog. From Elves to the Undead, we are here to bring you quality 3D printed miniatures from amazing artists and excellent prices.

To celebrate the end of the year, and to hopefully kick off 2021 with a bang, from now until 11:59 pm on the 31rst of December our entire catalog will be on sale. The best part is that there is no code required, as we have set up the website to automatically take 10% off your purchase at checkout.

two-idiots-printing-service.myshopify.com/

Please note that if you do encounter issues or have questions, I will be happy to answer them. you can post in our supporting company thread or message me directly.

From our gaming table to yours we wish you a happy holiday! -

Lord Marcus

TIPS Team

Link to comment
Share on other sites

Merry Christmas to all (or other denominational holiday!)
We here at TIPS just want to say thank you for a lovely reception this year. We opened our service with the aim of bringing high quality printed items to you, and judging by the feedback we have received I think we succeeded.
We look forward to more and better minis in the new year.
That said, there is still time to take advantage of our end of year sale! Eyeing an holy roman empire detachment? maybe an army of skeleton warriors? How about a legion of elves?
You have until 11:59 pm on December 31rst to take advantage of our 10% off end of year closeout (applied automatically at checkout)
From our team to you, happy holidays!

Link to comment
Share on other sites

Hello everyone and welcome to the new year! Thank you so much for your orders during our end of year sale!

We have some exciting new projects coming up and are looking forward to a good 2021. Please note that processing times are currently slowed as we work through the massive demand from our end of year sale.

Today I have some new miniatures that we've added to the store. Caballero miniatures has released command groups (standard, musician, champion) for the remainder of their infantry units (Previously only the baseline legion infantry had a command group.) We've released these as group packs, so you can get all 3 command models at once. The below images only represent two of the new command groups.

1091030_sm-.JPG

1091029_sm-.JPG

We've also put up the new Warlock Outcast and Warlock acolyte cavalry onto the store.

1091032_sm-.JPG

1091031_sm-.JPG

You can find them all in the Caballero miniatures section of our webstore, here:

https://two-idiots-printing-service.myshopify.com/collections/caballero-miniatures

Link to comment
Share on other sites

  • 9 months later...

I print mine at home, but those are very good prints. No layer lines, and the bit of texture will disappear quickly!

As for people who might wonder, quite a few Patreons allow for commercial printing at a certain tier, so it'll be above board.

Edited by zilberfrid
Link to comment
Share on other sites

19 hours ago, zilberfrid said:

I print mine at home, but those are very good prints. No layer lines, and the bit of texture will disappear quickly!

As for people who might wonder, quite a few Patreons allow for commercial printing at a certain tier, so it'll probably be above board.

it is above board. We are licensed to sell prints commercially for all of the collections on our webstore.

Link to comment
Share on other sites

4 hours ago, Lord marcus said:

it is above board. We are licensed to sell prints commercially for all of the collections on our webstore.

Yeah, I was adding that for people who seem to misunderstand licencing structures of 3d STLs and think everyone printing STLs commercially is a fraud (which I see too often).

  • Like 1
Link to comment
Share on other sites

2 hours ago, zilberfrid said:

Yeah, I was adding that for people who seem to misunderstand licencing structures of 3d STLs and think everyone printing STLs commercially is a fraud (which I see too often).

understood.

 

KZK minis has released a set of monopose goblins, which we have up on the website now. 

https://two-idiots-printing-service.myshopify.com/products/goblins-of-the-deep-mines-kzk-miniatures

2139107026_goblins1.png.b1ef5c0bfcb21716d3601adb7ee7dff6.png

We have tried for another in depth product listing again, with options for the different weapon variants instead of making separate listings. please let us know what you think!

Edited by Lord marcus
Link to comment
Share on other sites

1 hour ago, Lord marcus said:

understood.

 

KZK minis has released a set of monopose goblins, which we have up on the website now. 

https://two-idiots-printing-service.myshopify.com/products/goblins-of-the-deep-mines-kzk-miniatures

2139107026_goblins1.png.b1ef5c0bfcb21716d3601adb7ee7dff6.png

We have tried for another in depth product listing again, with options for the different weapon variants instead of making separate listings. please let us know what you think!

For someone with swamp orcs, these goblins would fit right in!

Link to comment
Share on other sites

  • 2 weeks later...

Well boy is today a triple threat! First with those exciting dark elves from Labyrinth.

Next up is Medbury miniatures with the Northern kingdoms line

https://two-idiots-printing-service.myshopify.com/search?type=product&q=Northern+kingdoms

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/FB_IMG_1635755511152_1024x1024@2x.jpg?v=1635755767[/img]

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/kingandadvisor_1024x1024@2x.jpg?v=1635614904[/img]

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/PXL_20211101_081556081_1024x1024@2x.jpg?v=1635754996[/img]

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/spearmeninattack_1024x1024@2x.jpg?v=1635497593[/img]

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/FB_IMG_1635720701883_2_1024x1024@2x.jpg?v=1635755747[/img]

and finally, to finish off todays triple threat of releases, Caballero miniatures november models

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-pelayo-and-retinue

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/Pelayo1_1024x1024@2x.jpg?v=1635820757[/img]

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-clergy-with-the-cross-of-pelayo

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/medievalclergy_1024x1024@2x.jpg?v=1635820843[/img]

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-praying-knights-set

https://cdn.shopify.com/s/files/1/0508/5783/6713/products/PrayingKnights1_1024x1024@2x.jpg?v=1635820946

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/PrayingKnights1_1024x1024@2x.jpg?v=1635820946[/img]

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-medieval-mass-cart

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/MassCart3_1024x1024@2x.jpg?v=1635821233[/img]

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/MassCart1_1024x1024@2x.jpg?v=1635821233[/img]

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-mounted-noble-with-standard-of-leon

[img]https://cdn.shopify.com/s/files/1/0508/5783/6713/products/Leonstandardbearer2_1024x1024@2x.jpg?v=1635822179[/img]

Blessing before battle 1.jpg

Blessing before battle 2.jpg

Cross of Pelayo 1.jpg

León standard bearer 1.jpg

León standard bearer 2.jpg

León standard bearer 3.jpg

León standard bearer 4.jpg

León standard bearer 5.jpg

Mass Cart 1.jpg

Mass Cart 2.jpg

Mass Cart 3.jpg

Mass Cart 4.jpg

Mass Cart 5.jpg

medieval clergy.jpg

Pelayo 1.jpg

Pelayo 2.jpg

Pelayo 3.jpg

Pelayo 4.jpg

Pelayo 5.jpg

Praying Knights 1.jpg

3 at rest with banner 1.png

Edited by Lord marcus
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...