Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Agent of Chaos

Best Undercoat for a Bloodthirster

Recommended Posts

Looking for painting tips before I start on a bloodthirster.

Right from the start I'm unsure what to use for undercoating. I typically spray everything in chaos black and then if its going to be predominantly red, another spray of Mephiston Red. This leads to a darker overall tone for my models so if I want a particular detail to pop (bright red on a banner for example) I will paint a layer of white first.

I really want the thirster to pop on the table and be a fairly bright centre piece to the army and so am considering spray undercoating in white. However I have had a bad experience with white spray before where it dried thick and flaky and made the models virtually unpaintable. 

Would people recommend a white spray undercoat?

Any other tips for undercoating to ensure I get a smooth finish ready for painting? 

Share this post


Link to post
Share on other sites

Another option is a light grey primer, I use an autoshop rattlecan, goes on very smooth and easy to paint on. Nearly everything I paint is over grey primer, I find it takes a lot longer to build up layers over black, especially lighter colours.

You could spray black and drybrush a white zenithal highlight, drawing the brush from the top to bottom moving in one direction only.

I used a white primer recently, another autoshop rattlecan from Halfords, seemed on pretty smooth without obscuring the details, see below

One thing I have started doing lately is after removing mold lines, is to give a quick sand to the area with 1200 grit wet and dry sandpaper, smoothes any imperfections without removing much plastic

IMG_20190809_233548.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Try Zenith method- Black, Grey and then white on the highest points

  • Like 1

Share this post


Link to post
Share on other sites

Zenithal shading would probably work  very well but practice on another model first. Why not split the difference and spray grey? Had no problem with that so far but I do recognize the problems with white spray. 

 

Share this post


Link to post
Share on other sites
Posted (edited)

It sounds crazy but if you actually undercoat everything with yellow you will end up with a very vibrant red. Using an orange red as your highlight color makes for a nice overall effect. 

Edited by Lorax

Share this post


Link to post
Share on other sites

Loads of good suggestions here already!

Would 100% agree with you on the reliability of Corax White spray too - if the conditions aren't perfect then you'll end up with a horribly powdery finish (have ruined far too many models doing this myself).  The two new off-white sprays (Grey Seer & Wraithbone) are however superb!  One thing to watch out for is that Grey Seer (the cold grey spray) can suck out a bit of vibrancy from the colour.

I'm guessing you don't have access to an airbrush?  If you do, then I'd thoroughly recommend P3 Morrow White applied as a zenithal undercoat.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...